OctoInformBeta

OpenAI preprint, September 2026 · 2. From a completed cone to its exceptional surface

Section 2.2 (setting): The exponent-seven construction over ℂ\mathbb C uses degree-one parameters and completion of the polynomial base

Defining the projective projection and completed cone morphism.

Hover over a blue or green term in the text, or a node in the graph, to find it in the other. Select it to read its declaration both in Lean and in words.

The Setting

The exponent-seven cone has a normalized projective surface and a completed coordinate ring built from the same homogeneous pieces. Let D=ℂ[u,v]D=\mathbb C[u,v] be the affine coordinate ring and K=Frac⁡DK=\operatorname{Frac}D its rational function field. The five line equations ℓi∈D\ell_i\in D and their images ai∈Ka_i\in K are given by (1). (ℓ0,ℓ1,ℓ2,ℓ3,ℓ4)=(u,v,u−1,v−1,u−v),ai=ℓi in K.(\ell_0,\ell_1,\ell_2,\ell_3,\ell_4) =(u,v,u-1,v-1,u-v),\qquad a_i=\ell_i\text{ in }K.(1)

For a prime pp, choose ppth roots rir_i of the aia_i in an algebraic closure of KK. The Kummer line extension LpL_p of KK is the intermediate field of the chosen algebraic closure generated over KK by r0,…,r4r_0,\ldots,r_4.✦ The concrete field LL, its seventh roots yiy_i, and the augmented root family ziz_i are specified in (2). Lp=K(r0,…,r4),rip=ai,L=L7,yi=ri(p=7),z0=1,zi+1=yi.L_p=K(r_0,\ldots,r_4),\quad r_i^p=a_i,\qquad L=L_7,\quad y_i=r_i\ (p=7),\quad z_0=1,\quad z_{i+1}=y_i.(2)

Let tt be a polynomial variable over LL; the chosen pairs PjP_j of root indices determine the section coefficients sijs_{ij} and the initial section algebra Binit⊂L[t]B^{\mathrm{init}}\subset L[t] in (3), the complex subalgebra generated by the section monomials sijts_{ij}t. (P0,P1,P2)=((1,4),(2,3),(5,0)),sij=ziz(Pj)1z(Pj)2(0≤i<6,0≤j<3),Binit=ℂ[sijt].\begin{gathered} (P_0,P_1,P_2)=((1,4),(2,3),(5,0)),\\ s_{ij}=z_i z_{(P_j)_1}z_{(P_j)_2} \quad(0\leq i<6,\ 0\leq j<3),\qquad B^{\mathrm{init}}=\mathbb C[s_{ij}t]. \end{gathered}(3) The normalization piece Tn⊂LT_n\subset L in degree nn is the complex linear subspace whose monomials of degree nn lie in the integral closure of BinitB^{\mathrm{init}} inside L[t]L[t], as in (4). Tn={a∈L:atn is integral over BinitextinL[t]}.T_n=\{a\in L:at^n\text{ is integral over }B^{\mathrm{init}} ext{ in }L[t]\}.(4)✦

The graded polynomial section algebra B⊂L[t]B\subset L[t] and completed cone ring R⊂L[[t]]R\subset L[[t]] are the coefficient-restricted subalgebras in (5); BnB_n denotes the homogeneous subspace in degree nn. B={∑n=0Nantn:an∈Tn},Bn=Tntn,R={∑n≥0antn:an∈Tn}.\begin{gathered} B=\left\{\sum_{n=0}^{N}a_nt^n:a_n\in T_n\right\},\qquad B_n=T_nt^n,\\ R=\left\{\sum_{n\geq0}a_nt^n:a_n\in T_n\right\}. \end{gathered}(5) Addition is coefficientwise and multiplication is the Cauchy product, with complex scalars acting through their images in LL. The polynomial inclusion j:B→Rj:B\to R regards a polynomial as a power series.✦ The normalized projective surface XX of BB is the scheme given by X=Proj⁡BX=\operatorname{Proj}B.✦

Let S=ℂ[x0,x1,x2]S=\mathbb C[x_0,x_1,x_2] be the polynomial base ring and A=ℂ[[x0,x1,x2]]A=\mathbb C[[x_0,x_1,x_2]] its power series completion. The projective plane ℙ2\mathbb P^2 over ℂ\mathbb C is the scheme given by ℙ2=Proj⁡S\mathbb P^2=\operatorname{Proj}S.✦ Choose nonzero degree-one parameters wi∈T1w_i\in T_1 such that the polynomial parameter homomorphism φ:S→B\varphi:S\to B is finite and injective; φ\varphi and the completed parameter homomorphism φˆ\widehat\varphi are the substitutions in (6). φ:S→B,xi↦wit,φˆ:A→R,xi↦wit.\varphi:S\longrightarrow B,\quad x_i\longmapsto w_it,\qquad \widehat\varphi:A\longrightarrow R,\quad x_i\longmapsto w_it.(6) Use φ\varphi for the SS-algebra structure on BB and φˆ\widehat\varphi for the AA-algebra structure on RR. The chosen completed tensor equivalence θ\theta is the AA-algebra isomorphism specified by (7). θ:A⊗SB→∼R,θ(a⊗b)=φˆ(a)j(b).\theta:A\otimes_S B\xrightarrow{\ \sim\ }R,\qquad \theta(a\otimes b)=\widehat\varphi(a)j(b).(7)✦ For c∈T1c\in T_1, the linear section ct∈Bct\in B with coefficient cc is a degree-one monomial.✦

The Polynomial Blowup

The origin ideal 𝔪⊂S\mathfrak m\subset S is generated by the three coordinates.✦ For a polynomial variable τ\tau over SS, the Rees algebra ℛ⊂S[τ]\mathcal R\subset S[\tau] of 𝔪\mathfrak m, its homogeneous components ℛn\mathcal R_n, and its coordinate sections ξi\xi_i are given in (8). 𝔪=(x0,x1,x2),ℛ=⨁n≥0𝔪nτn,ℛn=𝔪nτn,ξi=xiτ.\mathfrak m=(x_0,x_1,x_2),\qquad \mathcal R=\bigoplus_{n\geq0}\mathfrak m^n\tau^n,\qquad \mathcal R_n=\mathfrak m^n\tau^n,\qquad \xi_i=x_i\tau.(8) For a family (si)(s_i) in a ring CC, the section ideal (si)⊂C(s_i)\subset C is the ideal generated by the family.✦ The linear Rees section sτs\tau of an element ss of an ideal Q⊂CQ\subset C is the corresponding element of the Rees algebra of QQ.✦ The identification ℛ0≃S\mathcal R_0\simeq S induces the blowdown b0:V0=Proj⁡ℛ→Spec⁡Sb_0:V_0=\operatorname{Proj}\mathcal R\to\operatorname{Spec}S.✦

The graded direction homomorphism δ:S→ℛ\delta:S\to\mathcal R sends xix_i to ξi\xi_i.✦ Its projective direction morphism d0:V0→ℙ2d_0:V_0\to\mathbb P^2 contracts homogeneous primes along δ\delta; on structure sheaves, the section maps apply the induced local ring homomorphisms pointwise to local fractions.

The completion morphism c:Spec⁡A→Spec⁡Sc:\operatorname{Spec}A\to\operatorname{Spec}S comes from the inclusion of polynomials into power series.✦ The completed polynomial blowup VV, its blowdown bb, and its direction morphism dd are defined by (9), where pr⁡1\operatorname{pr}_1 and pr⁡2\operatorname{pr}_2 are the fiber product projections. V=V0×Spec⁡SSpec⁡A,b=pr⁡2:V→Spec⁡A,d=d0∘pr⁡1:V→ℙ2.V=V_0\times_{\operatorname{Spec}S}\operatorname{Spec}A,\qquad b=\operatorname{pr}_2:V\longrightarrow\operatorname{Spec}A,\qquad d=d_0\circ\operatorname{pr}_1:V\longrightarrow\mathbb P^2.(9)

The Definition

Definition 1. For the normalized section algebra BB and chosen parameters wiw_i, the projective normalization π:X→ℙ2\pi:X\to\mathbb P^2 is the projective morphism induced by φ\varphi in (10). π=Proj⁡(φ):X→ℙ2.\pi=\operatorname{Proj}(\varphi):X\longrightarrow\mathbb P^2.(10)✦ The uncompleted source model W0W_0 and completed source model WW of π:X→ℙ2\pi:X\to\mathbb P^2 are the fiber products in (11), taken along d0d_0 and dd, respectively. W0=X×ℙ2V0,W=X×ℙ2V,g=pr⁡2:W→V.W_0=X\times_{\mathbb P^2}V_0,\qquad W=X\times_{\mathbb P^2}V,\qquad g=\operatorname{pr}_2:W\longrightarrow V.(11) The completion projection q:W→W0q:W\to W_0 is induced by the identity on XX and the projection V→V0V\to V_0.✦

For i=0,1,2i=0,1,2, localizing φ\varphi and δ\delta gives homomorphisms from the plane chart ring UiU_i to the surface chart ring CiC_i and blowup chart ring DiD_i. These rings and the source chart ring EiE_i are defined in (12), with the subscript 00 denoting the degree-zero part. Ui=(S[xi−1])0,Ci=(B[(wit)−1])0,Di=(ℛ[ξi−1])0,Ei=Ci⊗UiDi.\begin{gathered} U_i=(S[x_i^{-1}])_0,\qquad C_i=(B[(w_it)^{-1}])_0,\\ D_i=(\mathcal R[\xi_i^{-1}])_0,\qquad E_i=C_i\otimes_{U_i}D_i. \end{gathered}(12) Their spectra have the standard open immersions into ℙ2\mathbb P^2, XX, V0V_0 and W0W_0, respectively; the three source charts cover W0W_0. Write αi:Ci→Ei\alpha_i:C_i\to E_i and βi:Di→Ei\beta_i:D_i\to E_i for the tensor inclusions. The degree-zero identification gives the blowdown chart homomorphism σi:S→Di\sigma_i:S\to D_i, and the fiber coordinate λi\lambda_i is the element of EiE_i given by λi=βi(σi(xi))\lambda_i=\beta_i(\sigma_i(x_i)).

The chart coefficient homomorphism εi:Ci→L\varepsilon_i:C_i\to L is evaluation at t=1t=1 on homogeneous fractions.✦ With ZZ an auxiliary polynomial variable, the rescaling ρi:B→L[Z]\rho_i:B\to L[Z] and the section chart homomorphism κi:B→Ci[Z]\kappa_i:B\to C_i[Z] are specified together with εi\varepsilon_i in (13), for f∈Bf\in B and a∈Tna\in T_n. εi(atn(wit)n)=awin,ρi(f)=f(wi−1Z),κi(atn)=atn(wit)nZn.\begin{gathered} \varepsilon_i\!\left(\frac{at^n}{(w_it)^n}\right)=\frac{a}{w_i^n},\qquad \rho_i(f)=f(w_i^{-1}Z),\\ \kappa_i(at^n)=\frac{at^n}{(w_it)^n}Z^n. \end{gathered}(13) The pullback chart cone evaluation ei:B→Eie_i:B\to E_i and the uncompleted cone morphism c0:W0→Spec⁡Bc_0:W_0\to\operatorname{Spec}B are defined by (14); αi[Z]\alpha_i[Z] applies αi\alpha_i to polynomial coefficients, and ev⁡λi\operatorname{ev}_{\lambda_i} evaluates at the fiber coordinate. ei=ev⁡λi∘αi[Z]∘κi,c0|Spec⁡Ei=Spec⁡(ei).e_i=\operatorname{ev}_{\lambda_i}\circ\alpha_i[Z]\circ\kappa_i,\qquad c_0|_{\operatorname{Spec}E_i}=\operatorname{Spec}(e_i).(14) Let η:W→Spec⁡A×Spec⁡SSpec⁡B\eta:W\to\operatorname{Spec}A\times_{\operatorname{Spec}S} \operatorname{Spec}B be the scalar extended cone evaluation with components b∘gb\circ g and c0∘qc_0\circ q. Let χ\chi be the canonical identification of this affine fiber product with Spec⁡(A⊗SB)\operatorname{Spec}(A\otimes_S B). The completed cone morphism p:W→Spec⁡Rp:W\to\operatorname{Spec}R is the composite in (15). p=Spec⁡(θ−1)∘χ∘η:W→Spec⁡R.p=\operatorname{Spec}(\theta^{-1})\circ\chi\circ\eta: W\longrightarrow\operatorname{Spec}R.(15)✦ Evaluation at one is the ring homomorphism B→LB\to L obtained by evaluating a section polynomial at t=1t=1.

In the paper, the result reads: for the polarization HH, W0=Tot⁡(𝒪X(−H))=X×ℙ2Tot⁡(𝒪ℙ2(−1))W_0=\operatorname{Tot}(\mathcal O_X(-H)) =X\times_{\mathbb P^2}\operatorname{Tot}(\mathcal O_{\mathbb P^2}(-1)), completion gives a proper morphism p:W→Spec⁡Rp:W\to\operatorname{Spec}R that is an isomorphism off the exceptional surface, and for the source and plane divisor ideals 𝒥\mathcal J and ℐ\mathcal I with respective conormal bundles 𝒪X(H)\mathcal O_X(H) and 𝒪ℙ2(1)\mathcal O_{\mathbb P^2}(1), the finite morphism g:W→Vg:W\to V satisfies 𝒥=g*ℐ\mathcal J=g^*\mathcal I.

What Is Checked

The construction is stated over ℂ\mathbb C for the exponent-seven Kummer field, its normalized homogeneous pieces, and chosen degree-one parameters. Such parameters exist with a finite injective polynomial parameter homomorphism.✦

Substitution of degree-one elements preserves every homogeneous degree.✦ For a field kk and an integral graded homomorphism f:𝒞→𝒟f:\mathcal C\to\mathcal D of graded kk-algebras with 𝒞0=k\mathcal C_0=k, the first containment in (16) holds; the direction homomorphism δ\delta satisfies the second, where a subscript ++ denotes the irrelevant ideal.✦ 𝒟+⊆f(𝒞+)𝒟,ℛ+⊆δ(S+)ℛ.\mathcal D_+\subseteq\sqrt{f(\mathcal C_+)\mathcal D},\qquad \mathcal R_+\subseteq\sqrt{\delta(S_+)\mathcal R}.(16) These are the radical conditions for the induced projective morphisms. The Rees coordinate sections ξi\xi_i have degree one.✦

Chart coefficient evaluation preserves complex scalars✦, and the rescaled sections ρi(B)\rho_i(B) lie in the image of the coefficient homomorphism εi[Z]:Ci[Z]→L[Z]\varepsilon_i[Z]:C_i[Z]\to L[Z].✦

For a graded family 𝒯\mathcal T of kk-linear subspaces of a coefficient field FF, a finite family vi∈𝒯div_i\in\mathcal T_{d_i} of positive degrees defines a formal power series substitution xi↦vitdix_i\mapsto v_it^{d_i} with values in the coefficient-restricted graded series algebra.✦ The generating series vitdiv_it^{d_i} with coefficient viv_i and degree did_i is a monomial formal power series.